Firefighter signs

My husband is a firefighter and was given an award for helping at West, Texas. I wanted to hang up his accomplishments so I decided I would make some firefighter wood boards.

Materials:

All I used were these paint pens

and a 2x2ft thin board from lowes, (had them cut a 24x12in and two 12x12in boards) And used the paint below to stain the boards. 

I painted the boards and then scraped off 

The extra paint to make the boards look like this 

 

I let them dry over night and then googled this firefighter saying to paint on the 24in by 12 in with my paint pens

And I made this on the 12 in by 12 in

The last 12 by 12 inch board is for his award. With a clip on top. 

(I blurred it out but you get the idea :))

Here is the final product. I hung these up by using poster command hooks. 

This project cost me $5 for the wood boards, $2 for the white paint pen and the red one I borrowed from a friend.

I already had the paint and command hooks but it cost about $7.00. If you do not have any of the materials the whole project will cost you under $15.